Redline Nova10 Super 90W 100W RF30W RF60W
EFFICIENT
Up to 8G Acceleration
Full AC Servo Motors make acceleration nearly instant at 8G of force with top speeds of 4,200 mm/sec on all RF models.
Excellent Precision
Linear guide rails with ball bearings offer greater precision and smoother motion, which improves print quality and longevity.
Lightweight Laser Head
A lightweight laser head contributes to less over-scanning and an overall reduction in vibration.
ROBUST UNIBODY
Most lasers employ a unibody structure where the components are bolted to a thin outer shell. However, if you need speed, it's of utmost importance to make the frame as rigid as possible to stop the machine from flexing. The Redline series frame is so robust, that you can even remove the entire side panel for greater accessibility when troubleshooting.
All-In-One DESIGN
In the NOVA's Super Clean Pack design, not only are the linear rails and bearing blocks enclosed, but protective curtains on the left and right side rails now prevent unwanted particles from spreading beyond your work area.
COMPREHENSIVE
High-Resolution Camera
All Aeon lasers are now equipped with built-in high-resolution cameras for precise positioning and monitoring.
Integrated Autofocus
Say goodbye to collisions and gouged material. The Aeon Redline Series has a newly designed laser head with integrated autofocus.
Bullseye Leveling Gauge
Ensuring your laser is level can now be done at a glance. Both MIRAs and NOVAs are fitted with Bullseye Leveling Gauges.
Material Pass Through
For the Redline Series, a passthrough is included in all NOVA models.
Status Light
Aeon is renowned for its stylish and sleek appearance. The Aeon Laser logo on the front access door panel is now backlit and doubles as a functional Status Light, illuminating white when in standby, red when an error is encountered, and green while in operation, adding both form and function to an already stunning design.
Intuitive LCD Display
The most recent revision to the NOVA Keypad brings commonly used functions right to the surface, for reduced setup times and overall ease of use. You can even monitor water temperature, amperage (mA), air pressure (psi), and the temperature of your optics right from the vibrant 5" LCD display, for the ultimate user experience.
TOOLLESS MAINTENANCE
Say goodbye to painstaking tube replacements. This innovative approach allows for swapping tubes in and out of your Aeon laser, without having to renegotiate the beam path. This means it is now feasible to keep a spare tube on the shelf or quickly swap between higher or lower-wattage tubes as needed.
All mirrors are now easily accessible and can be cleaned or replaced without the use of any tools or having to recalibrate.
The lens cartridges on all Redline models are now magnetic and the focal lens itself is press-fit with a silicone washer, for easy access.
Proactive Smart Monitoring
All optics are now fitted with thermal sensors to record and report temperature readings to the keypad, thus eliminating the likelihood of unexpected failures. This proactive approach not only saves you from costly mistakes and downtime, it also reduces the need for frequent unwarranted cleaning. To top it off, the controller now records these readings along with ambient temperature, laser tube runtime and machine parameters, to serve as a diagnostic log in the event troubleshooting is needed.
Safe-Guarded Optics
To further reduce the need for maintenance, all optics are now fully removed from the work area, taking the Clean Pack Design to its highest potential.
Safe-Guarded Laser Head
With the laser head sealed to where no dust or debris can enter, all that remains are a series of cost-effective windows, which are far easier to maintain and replace if needed.
| Parameters | Model | Nova10 Super/Elite | Nova14 Super/Elite | Nova16 Super/Elite |
| Working Scope | Working Area (mm) | 1000*700mm | 1400*900mm | 1600*1000mm |
| Z Axis Lifting Space | 200mm | 200mm | 200mm | |
| Max Lifting Capacity | 120KG | 120KG | 120KG | |
| Laser Tube | Laser Tube Power | Glass: 90W/100W RF: 30W/60W |
Glass: 90W/100W/130W RF: 30W/60W |
Glass: 90W/100W/130W/150W RF: 30W/60W |
| Motion system | Max Engraving Speed | 4000mm/s (Super) 1200mm/s (Elite) |
4200mm/s (Super) 1200mm/s (Elite) |
4200mm/s (Super) 1200mm/s (Elite) |
| Acceleration | 8G (Super) 5G (Elite) |
8G (Super) 5G (Elite) |
8G (Super) 5G (Elite) |
|
| Accuracy | Minimum Font Size(RF Tube) | 1.0×1.0mm | 1.0×1.0mm | 1.0×1.0mm |
| Positioning Accuracy | <=0.1mm | <=0.1mm | <=0.1mm | |
| Configuration | Working Table | Honeycomb + Blade table | Honeycomb + Blade table | Honeycomb + Blade table |
| Cooling system | Glass: Built-in 5000 chiller RF: Air-cooled |
Glass: Built-in 5200 chiller RF: Air-cooled |
Glass: Built-in 5200 chiller RF: Air-cooled | |
| Fume Exhaust Fan | Built-in 500W (Auto Start-stop) | Built-in 500W (Auto Start-stop) | Built-in 500W (Auto Start-stop) | |
| Air Assist | Built-in compressor 750W with 24L air tank (Auto Start-stop) | Built-in compressor 750W with 40L air tank (Auto Start-stop) | Built-in compressor 750W with 40L air tank (Auto Start-stop) | |
| Auto Focus | √ | √ | √ | |
| Wireless Connectivity | √ | √ | √ | |
| Red Dot Positioning | √ | √ | √ | |
| Camera | 100° 8 megapixel (3840×2160) | 100° 8 megapixel (3840×2160) | 100° 8 megapixel (3840×2160) | |
| Internal Memory | 1G | 1G | 1G | |
| Operating Software | Rdworks/Lighburn(Optional) | Rdworks/Lighburn(Optional) | Rdworks/Lighburn(Optional) | |
| Compatible Design Software | CorelDraw/Illustrator/AutoCAD | CorelDraw/Illustrator/AutoCAD | CorelDraw/Illustrator/AutoCAD | |
| Package | Machine Dimension(mm) | 1500*1210*1125 | 1900*1410*1125 | 2100*1510*1125 |
| Net Weight (KG) | 415KG | 560KG | 566KG | |
| Gross Weight(KG) | 532KG | 683KG | 730KG | |
| Optionals | Rotary Clamp/Lightburn Software /Air Purifier | |||
